ELECTRICAL VALVES DIODE EURO

Autonomy ball valves can be used in thermohydraulic applications. They are specially designed for use in systems for regulating and measuring consumption in heating installations of one or several zones of autonomy, installations of alternative forms of energy, cold or hot liquids and general automation. They are not suitable for the control of flammable liquids & gases.

ENGINE TECHNICAL CHARACTERISTICS:

State-of-the-art EURO solenoid valve motor, double-turn closed-gear metal gear motor designed for trouble-free continuous operation for two-way solenoid valves. Quick installation directly on the valve and locking with a screw.

  • Operating voltage 220V / 50Hz.
  • Absorbed power 9 VA (Motor 6 Watt).
  • Shaft torque 18 Nm MAX – constant 12 Nm / Turns 1/4 rpm.
  • Command time 50sec at 90° degrees.
  • Operating temperature -5°/ +55°C.
  • 5 x 0.75 mm insulated cable – 70 cm long.
  • Electrical protection / waterproof IP54.
  • Plastic cap made of non-combustible material.
  • Base made of special alloy plastic with glass and support neck made of metal alloy for long-term high durability.
  • Metal reducer gears.
  • Single metal gear-cobbler.
  • Crouzet microswitches.
  • Internal relay 48V DC.
  • Connection left or right.
  • Fast & easy locking to the trunk with a screw.
  • CE certification.

TECHNICAL CHARACTERISTICS OF VALVE DIODES:

Full-flow body diode made of heavy-duty forged brass, seals with double o-rings on the shaft and with Teflon on the rotating ball.

  • 1 conical fitting with rubber.
  • Brass body EN12165-CW617N nickel plated.
  • Brass ball EN12164-CW614N chrome plated.
  • EN12164-CW614N brass shaft with EPDM o-ring.
  • Medium temperature 0∘/ +95∘C.
  • Operating pressure PN16.
  • Maximum differential pressure 10bar.
  • CE certification
  • Cross-sections: 1/2”, 3/4”, 1”, 1 1/4”

BEV TM AUTONOMY ELECTRONIC TRIODE

Self-contained three-way solenoid valves can be used in thermohydraulic applications. They are specially designed for use in systems for regulating and measuring consumption in heating installations of one or several zones of autonomy, installations of alternative forms of energy, cold or hot liquids and general automation. They are not suitable for the control of flammable liquids & gases.

ENGINE TECHNICAL CHARACTERISTICS:

State-of-the-art BEV TM double-turn closed-gear solenoid valve motor with metal gears designed for trouble-free continuous operation for three-way solenoid valves. Quick installation directly on the valve and locking with a fork.

  • Operating voltage 220V / 50Hz.
  • Absorbed power 9 VA (Motor 6 Watt).
  • Shaft torque 18 Nm MAX – constant 12 Nm / Turns 1/4 rpm.
  • Command time 112sec at 180° degrees.
  • Operating temperature -5°/ +55°C.
  • 5 x 0.75 mm insulated cable – 70 cm long.
  • Electrical protection / waterproof IP40.
  • Plastic cap made of non-combustible material.
  • Base made of a special alloy of plastic with glass for long-term high durability.
  • Metal reducer gears.
  • Single metal gear-cobbler.
  • Crouzet microswitches.
  • Internal relay 48V DC.
  • Connection left or right.
  • Fast & easy locking to the trunk with safety-fork.
  • CE certification.

TECHNICAL CHARACTERISTICS OF THE VALVE BYPASS:

Three-way full-flow stem made of heavy-duty forged brass, seals with double o-rings on the shaft and Teflon on the swivel ball.

  • TYPE L – HEATING.
  • 3 straight fittings with fiber.
  • Brass body EN12165-CW617N nickel plated.
  • Brass ball EN12164-CW614N chrome plated.
  • EN12164-CW614N brass shaft with EPDM o-ring.
  • Medium temperature 0∘/ +95∘C.
  • Operating pressure PN16.
  • Maximum differential pressure 10bar.
  • CE certification.
  • Diameters: 1/2”, 3/4”, 1”