COOLING-HEATING ULTRASOUND THERMOMETER
ULTRASONIC THERMOMETER DN15 1.5m³/h 110mm MBUS with ½” fitting
ULTRASONIC THERMOMETER DN20 2.5m³/h 130mm MBUS with ¾” fitting
ULTRASONIC THERMOMETER DN25 3.5m³/h 160mm MBUS with 1″ fitting
SPECIFICATIONS :
- Suitable for measuring energy in heating, cooling and domestic hot water systems, with a battery lasting up to 10 years and the possibility of being placed on the return as well as on the input with an intelligent change system through its program.
- The calorimeter screen can be placed up to 1.35m away from its wall-mounted base.
- New ultrasound technology with smart functions, interface with MBUS and easy battery replacement.
- Save current month consumption data +25 months back with full history where it remains in memory without losing even after battery expires/changes.
- Necessary parts for mounting the calorimeter: The ball valve for mounting the second sensor of the calorimeter and the filter to prevent debris in the meter.
- CE EMC & CE LVD certified.
- Produced in China – Assembly & Final Inspection in Greece.
BALL VALVE DN15 with socket for probe M10X1- ½”
BALL VALVE DN20 with socket for sensor M10X1- ¾”
BALL VALVE DN25 with socket for sensor M10X1- 1″
Necessary accessory for placing the calorimeters
The ball valve is used to accommodate the second sensor of the calorimeter and also serves as a shut-off valve.
It is placed in the opposite supply from the calorimeter (inlet or return).
FILTER FOR THERMOMETER DN15 ½”
FILTER FOR THERMOMETER DN20 ¾”
FILTER FOR THERMOMETER DN25 1″
Necessary accessory for placing the calorimeters.
The filter is used to retain debris so that the calorimeter does not clog.
It is placed in the same supply as the calorimeter and before it during the water flow.
In case of not installing a filter, the warranty is NOT valid.